How To Reset A Furnace After Overheating?

Short cycling occurs when your heater is turned off before it completes its full heating cycle. Your HVAC expert will use the language; therefore, you must understand it. Short cycling occurs when your furnace overheats. Allow it to cool before attempting to restart it.

Although pressing the reset button should restart your furnace, fuel may not start flowing until you complete a different step. Of course, the only fuel used by an electric furnace is electricity, but to be cautious, turn it off before restarting it.

Resetting A Furnace After It Overheats

When a furnace is overheated, the reset button pulls out, and you must press it back in to restart the furnace, but there is a certain protocol to follow. The following are the steps for resetting an electric, gas, or oil furnace –

1. Restarting An Electric Furnace With A Reset Button

If the furnace doesn’t have a power button, turn off the circuit breaker that controls it, open the blower housing, and find the reset button on the side of the blower motor. Press it in until it clicks, then turn on the breaker to reestablish electricity to the furnace. When the furnace gets a signal from the thermostat, it should automatically start.

2.Restarting A Gas Furnace With A Reset Button

  • Check that the pilot light is turned off. If it isn’t, flip the gas control switch to “off” and ensure the pilot light is turned off.
  • Reduce the thermostat temperature as much down as you can
  • Switch off the furnace’s electricity supply by flipping the breaker in the circuit box if the furnace is equipped with electrical ignition.
  • Cut off the furnace’s main gas supply while keeping the pilot gas supply line turned on.
  • Hold a lit match to the pilot flame jet’s aperture to relight the pilot light.
  • Reset the circuit breaker, and then reactivate the main gas supply.
  • Hold down the reset button for roughly 30 seconds while increasing the temperature on the thermostat.

3. Restarting An Oil Furnace With A Reset Button

  • Before resetting an oil furnace, determine the cause of the cutoff. If you run out of oil, you will first need to fill the tank and bleed the fuel line.
  • Locate the bleeder valve. It’s a tiny black box beside the burner with fuel lines going into it in the latter instance.
  • Install a large container to capture at least 1 quart of fuel beneath the valve, or connect tubing from the fuel pump to a 1-quart plastic bottle.

It is a rare homeowner who can manage furnace repair and maintenance without expert assistance — therefore, do not try to DIY to avoid harm. Making the wrong move when flammable and volatile fuels are available, and doing electrical repairs when you are unfamiliar with the necessary procedures, can have catastrophic implications. When you have issues with your heating system and do not feel secure enough to perform the repairs yourself, do not be afraid to ask for help.

Looking for a furnace replacement service near you? Contact Carter Heating & Cooling. They provide the best heating service in Bowling Green. Call (270) 282-1183.

Should You Hit The Reset Button On Your Furnace?

The function of a furnace’s reset button is to shut it down before it trips your circuit breaker. The reset button on your furnace is an easy way to address any short-term problems. However, if your furnace continually shuts down and resets, it indicates a more serious issue. When your reset button appears for the first time, your initial instinct should be to press it.

Troubleshooting Reset Problem

Begin by attempting to reset your furnace once. If you have the same difficulty, the problem might be caused by something that a reset button cannot handle. If you feel compelled to tap it again, do not press it more than twice. Then you need to go through a troubleshooting process to make sure that your furnace works properly. Below are a few troubleshooting steps because of which your furnace might need constant resets:

  • Turn Off The Furnace

Before beginning the troubleshooting process, turn off the electric supply to your furnace.

  • Check Fuel Level

Refilling your oil is one of the most difficult things to remember if you are used to a gas furnace. If you utilize propane heating methods, the same rationale applies. Begin by inspecting your oil tank. If it is empty, refill.

  • Check Flame Sensor

If your reset button pops up, again and again, the flame sensor could be the issue. Flame sensors have an unhealthy habit of getting filthy. It is preferable if you make a routine of inspecting and cleaning your flame sensor every six months. They can be cleaned with anything from a hard brush to steel wool.

Your owner’s handbook may have a different view, so make sure to consult it before cleaning. Checking your burner is also synonymous with checking your flame sensor. While you are there, make sure no dust or rust is surrounding the flame sensor. Anything in this region has the potential to trigger an ignition failure.

  • Inspect Airflow

If your furnace is unable to breathe, it will be unable to create the air required to ignite. Check the air filter and see if it has turned grey. The filter might need a change. Occasionally, a vacuum can be used to clean the filter. Remove as much dust as possible.

  • Inspect The Fuel Line

Examine the fuel line. A blocked fuel pipe is a very typical problem with a furnace. Check that none of the valves along your fuel line are closed. Typically, this indicates that the valve is pointing in the incorrect direction. Turn the valve until it is open. The flow should be audible once again. Do not reopen the flow while the furnace is still running; this might result in fuel difficulties.

  • Check The Thermostat

A thermostat instructs your furnace when to turn on and off. Examine your thermostat to determine if it has any problem codes. If no error codes appear, make sure the thermostat is set to your chosen temperature.

If it is very low, the thermostat will turn off repeatedly. This, however, does not indicate that you should restart your furnace. If adjusting the temperature does not work, clean the surface and the interior. Wires encrusted with muck may not communicate effectively with your furnace.

  • Check Corrosion And Old Age

Older systems may not age well, resulting in serious problems if not addressed promptly. If your system is older, rust is an indication that it needs to be replaced. Corroded metal might result in an unintentional leak and a hazardous scenario.

If your system is recent, rust may indicate that it has been exposed to too much humidity. Examine the area for any adjacent leaks and fix them if necessary. Consult a technician to discover whether any detailed repairs are required.

Searching for an HVAC specialist near you? Contact Carter Heating & Cooling. We provide heating service in Bowling Green. Call (270)-535-0689.

Five Things To Avoid For Your Air Conditioner To Run Smoothly

The demand for air conditioners is high during the summer season, but people neglect to care about the appliance and often pay expensive bills. If your air conditioner is frail, healthy, and running at its optimal level, it is crucial to avoid certain things. The following are five simple things to know for your AC running smoothly, all season long.

1. Incorrect size of air conditioner

When you purchase an air conditioner, always pick them as per the size of your room. This one parameter is usually avoided by many which leads to malfunctioning in an air conditioner.

Disadvantages of purchasing a large air conditioner

  • It consumes more energy resulting in high utility bills.
  • The temperature changes lead to multiple changes in an air conditioner impacting its efficiency.

Disadvantages of purchasing a small air conditioner

  • It needs more time to cool the room.
  • The unnecessary burden on the condenser will impact the efficiency of the condenser.

Thus, an appropriate size air conditioner will give you the best returns on the price you have paid.

2. Untimely maintenance and replacement of air filters

The best way to keep the air conditioner in check is to keep it clean and well maintained. You should never skip routine checkups and maintenance of air filters to avoid expensive affairs. If your air filter gets clogged with dirt and dust, it will obstruct the airflow and impact indoor air quality.

Depending upon the air filter type, you must consider replacing them every 30-90 days. You cannot expect them to run efficiently throughout the season without replacing them. If you are experiencing any issues with your air filter, our team for AC repair in Bowling Green will help you resolve all the problems.

3. Air conditioner usage

Overuse and underuse of air conditioners both impact its efficiency. If your air conditioner is running all the time, it will lead to high energy consumption and utility bills.

Under usage of air conditioners leads to the development of mold inside the unit that affects the functioning of the air conditioner and impacts its good health.

4. Incorrect thermostat settings

You should regulate the thermostat setting as per the temperature of the room. The lower efficiency of the air conditioner is due to lower thermostat settings.

When the thermostat setting is low, it creates a heavy load on the air conditioner unit and the system skips the temperature you had set leading to more power wastage.

5. Unclean outdoor unit

The outdoor condenser unit often gets accumulated with dust particles that obstruct the airflow. Always keep the outdoor unit in a shadowy place to avoid the settling of dust particles. If the outdoor unit is left uncovered during winters, it leads to insufficient airflow and inadequate airflow is the root cause of many AC problems.

Carter Heating and Cooling – certified and skilled technicians are known for their best quality work in heating, ductless, and AC services in Bowling Green. If you are looking for the best and affordable maintenance plans for your cooling system, connect with the team on 2705350689.

Things You Should Know About AC Filters

If you are in Bowling Green, you know how air conditioners benefit you in your everyday life. Changing air filters now and then must be a hassle for you. But knowing about the issues and benefits related to it will help you understand them better.

Types Of Air Filters

  • Flat air filters

You might not know but, flat air filters are disposable ones and, their replacement is every 30 days. They are known for their capability to capture large particles like lint, dander, and dust.

  • Pleated air filters

Pleated air filters are also known as extended surface filters. They are best in capturing small particles such as bacteria and mold. If you own pleated air filters, change them every 90 days. Replacement of air filters is expensive and requires a skilled technician to avoid multiple issues further. If you are looking for AC installation in Bowling Green, we are available with our well-trained technicians.

  • Electronic air filters

These filters are best in capturing microscopic particles such as dust and smoke. If you compare to other filters, electronic air filters improve indoor air quality by 95%. The trapping process is similar to other filters, except that the microscopic particles are captured with electricity when they contact the air filter.

  • Washable air filters

If you are among those who purchase eco-friendly items, the washable air filter is a suitable option for you. They are 2-3 times more expensive than flat filters but last for five years with proper care and maintenance.

Benefits Associated With Air Filters

If you take care of the filters and replace them timely, they come up with multiple benefits:

  • Utility bills

If you are worried about utility bills, check the air filter once. A clogged air filter will restrict the airflow and will demand more energy to work efficiently. While replacing them routinely will help in reducing energy consumption and utility bills.

  • Air quality

The air filter is like a guardian. It protects the cooling system from dust, and mold which improves indoor air quality.

  • Protects your cooling system

When dust or debris gets accumulated in the ducts, they harm the cooling system and often lead to expensive maintenance and failure of other components. The air filter acts as a protector for your cooling system as it does not allow the accumulation of dust and dirt in the duct area.

  • Eco friendly

The average home emits twice as many greenhouse gas emissions as the average car. When the air filter is not working efficiently, your HVAC system consumes more energy to cool your room. You can avoid this by not skipping any air filter routine checkup.

  • Air filter rating

A standard rating system known as Minimum Efficiency Reporting Value (MERV) rates the air filter on a scale of 1 to 20. For example, MERV 8 is more efficient than MERV 6.

From AC installation, repair to AC maintenance in Bowling Green, Carter Heating and Cooling technicians are skilled in handling every small or big issue with your cooling system. Call 24*7 support team on (270) 282-1183.

How Often Should I Change The Air Filter For My Home AC?

An air conditioner’s filter is very susceptible to dust and debris. The primary goal of an air filter is to accumulate dirt and reduce the flow of contaminants within a room. Cleaning these filters is one of the responsibilities of any homeowner. How often should air filters be cleaned or replaced? Where can you get AC repair in Bowling Green?

How Do Air Conditioners’ Air Filters Become Dirty?

Dirty air filters are a threat to an air conditioner’s longevity. But what exactly causes them to become dirty? Here are the top 4 reasons that can cause an air conditioner’s filters to become clogged –

1. Inch pleated air filter

These filters are small in size and are more prone to catch airborne contaminants. As a result, they get dirty faster than thicker filters. Getting thick filters can reduce the number of times it has to be replaced or cleaned while also improving the efficiency of an air conditioner.

2. Fan setting

When the fan setting on the thermostat is set to “ON,” the internal blower will run continuously. As a result, the filters continuously capture airborne contaminants making them dirty faster. Set your thermostat fan to “auto” to eliminate this problem.

3. Leaky air ducts

Leaky air ducts contribute to 20-30 percent of air loss in households. Leaky ducts make an air conditioner work for longer hours to generate cold air. The consequence of long-running hours for an air conditioner is excess energy bills and dirty air filters. A professional from AC repair in Bowling Green can fix this issue by sealing all the ducts.

4. Furry pets

Air filters tend to catch and accumulate all sorts of dust. However, for house owners with pets, the air filters tend to get clogged more often. Replacing or cleaning these air conditioners can significantly increase the airflow within a room.

What Problems do Dirty Air Filters Cause?

1. Allergies

The flow of dirty air can only cause health issues and dust allergies. Allergens accumulate inside the unit and eventually loosen and blow into the air you breathe.

2. Energy bills

Air conditioners that have dirty air filters work for longer durations than they should. As a result, the energy consumption of an air conditioner increases, and the energy bills experience a hike.

3.Short cycling

Dirty air filters cause an air conditioner to turn on and off continuously. This is known as short cycling. A consequence of short cycling is excessive power consumption.

4. System Damage

Neglecting cleaning processes for an air conditioner can deteriorate the condition of an air conditioner. Regular cleaning of an air conditioner can increase longevity.

How much cleaning is enough for my air filters?

  • Normal 1-inch to 3-inch filters must be replaced every 30-60 days.
  • Filters must be changed every 60 days for house owners with pets.
  • Filters may only need to be changed once every 6-12 months in a household without pets.
  • Filters must be changed every 20-45 days in homes with many pets.

Carter Heating and Cooling is an AC service in Bowling Green. Our professionals specialize in improving indoor air quality, as well as cleaning and maintenance. We provide services for commercial and residential purposes. Reach out to us at (270)-535-0689 to get your maintenance scheduled now.

Why Is Cleaning Your Air Ducts Essential This Winter?

Our air conditioners work endlessly during summers, providing us cool air to spend the season peacefully. After the over-functioning of the system, various parts of the air conditioner are affected. One such part is the air ducts. As many airflows occur throughout the summer season, heaps of debris and dust get accumulated in the air ducts, obstructing the air from passing.

If the last time you cleaned your ducts was during the AC installation in Bowling Green, your cooling and heating systems might be prone to damage. It is essential to clean your air ducts this winter as the dirt will get mixed in your air when you start running your heater. After the summer season ends, you can schedule an AC maintenance in Bowling Green and acquire professional cleaning for your air ducts.

Here is a list of reasons why you should get your air ducts cleaned by a professional this winter –

  • Enhances energy efficiency of your system

Debris and dust-filled ducts become a hurdle and obstruction for the air flowing through them. As a result, your system has to induce more effort to do its heating or cooling job. This adversely affects the efficiency of the system and also increases your energy bills. Keeping the ducts unclogged will ensure that your system works with great efficiency and does not consume unnecessary energy.

  • Protection of your cooling and heating system

Every change is the system being interconnected; extra pressure on the system may damage their parts. Also, clogged ducts can result in clogged air conditioner coils, contaminated blower wheels, etc. To avoid any major damage to your system, getting AC maintenance in Bowling Green can be extremely beneficial.

  • Stronger Airflow

Clean air ducts will help in increasing airflow and ventilation in your space. This won’t be possible if your air ducts are blocking the airflow with debris and dust. Sometimes there could be mold build-up as well, which could worsen the situation.

  • Initiate Good Air Quality

The dirt accumulated in the ducts mixes up with the air flowing through them, resulting in poor air quality. Poor air quality can cause asthma, winter allergies, and harbor allergens like pollen and pet dander, risking your family’s health. To be able to breathe cleaner air, you must get your air ducts cleaned without any delay.

  • Removal of Odor

Mold and mildew build-up in your air ducts can cause unpleasant odors to linger around in your house. It can be extremely inconvenient to live in such an environment. Hence, cleaning your air ducts should be on your to-do list this winter.

Clean air ducts are a necessity for cleaner air and a pleasant environment. Carter Heating & Cooling is one of the best HVAC contractors in Bowling Green, and our team can help you have crystal-clean air ducts this winter without much hassle. To book an AC installation in Bowling Green, call us at (270)-535-0689 today.

Do You Need To Service Your AC Every Year?

Experts suggest getting an AC service in Bowling Green once a year for an efficient operation. However, no regulation requires you to do so. Even your trusted AC technician or firm will advise you the same thing. In such a scenario, it’s reasonable to wonder if the HVAC firm is attempting to take more money from you or if annual servicing really is a need.

Regular AC Maintenance Is Required

Like any other equipment, an air conditioner has inevitable wear and tear. Therefore, it requires routine maintenance to work correctly. Whether you use the Aircon all year or only in the summertime, the air filters collect dust, dirt, and other contaminants. As such, the units need to be cleaned and maintained regularly.

5 Reasons To Service Your AC Annually

There are several reasons that you should get AC service in Bowling Green for your air conditioning unit at least once a year. Some of them are listed below:

  • Recover Lost Performance

According to studies, yearly service aims to manage about 95 percent of the efficiency that is lost as your air conditioner operates continuously, its efficiency decreases. Natural damage, buildup, and continual use are the most common causes. Yearly service ensures that much-lost effectiveness is regained, ensuring that the air conditioner performs efficiently throughout the year.

  • Prevent Overloading

Your air conditioner can overheat at any time, even when there is no visible sign of it. This occurs when any piece of the AC seems to be under tension. Servicing allows the technician to detect such problems and their underlying causes. Taking care of these issues right away will keep the device from overheating.

  • Preserve High Air Quality

Closed houses must take extra care of their air quality. You and your loved ones will breathe in the air in the house that may be contaminated. This can lead to increased allergies as well as other health issues. Regular AC maintenance and cleaning, however, can help you prevent this.

  • Preventing The Majority Of Problems

The most frequent AC problems will have distinct symptoms, such as inconsistent cooling, tripping circuit breakers, and so on. These would be signs that issues are brewing within the Aircon. Yearly seasonal servicing includes AC cleanup, ventilation systems replacement, coil maintenance, leak inspections, etc.

  • Seasonal Servicing Has Many Advantages

Regular AC service may improve AC performance while also lowering power expenses. A non-serviced air conditioner may use more energy to produce cool air and may not offer efficient cooling due to gas leaks. Ultimately, the impact of not servicing your AC yearly will be reflected in the increased power bills or the increasing need for AC repair in Bowling Green.

Your aircon needs regular care, maintenance, and cleanup. Not giving your unit these can cause problems in the future in the form of increased power bills and repairs. For efficient repair and maintenance services near you, contact us at (270) 282-1183. You will receive fast service and problem resolution because we realize how tough it is to be sans your Aircon in any season.

Pros And Cons Of Installing AC On Your Own

The air conditioner is one of the electrical devices you need all-round the year. Whether it is dry and cool winters or sweltering and arid summers, installing and maintaining an air conditioner in Bowling Green has become a necessity. Thus the demand for the system has increased exponentially. While buying a new unit, a question that always crosses our mind is, is it possible to install an air conditioner on your own? Let us look at some points before answering the question.

Advantage Of Installing An Air Conditioner On Your Own

  • It Saves Money

DIY AC installation in Bowling Green can help you save money. Hiring professionals to install the system can increase your expenses, as you have to pay an hourly rate. Fixing a new unit by yourself will cut down the cost to a great extent.

  • Chance To Learn A New Skill

Installing a new unit on your own will help you to learn a new skill. To fix an air conditioner, you can always consider the booklet and gain knowledge online. This skill can later help you deal with other DIY fixes in your house.

  • Accessibility To The Professional

Living far away, especially in rural areas, might come as a challenge to find a professional who can fix an air conditioner. On the contrary, the option of DIY installation or AC repair in Bowling Green is always open for you.

Drawbacks Of DIY AC Installation

  • Damage To The New Air Conditioner Unit

Improper installation of the system can cause a lot of damage to the system. It can reduce the lifespan of your AC. Thus, a proper fixing of system parts is mandatory. Contacting the nearest service for AC installation in Bowling Green is an option to go for.

  • Professional Certification

In some cities, it is mandatory for AC technicians to possess certification. Therefore, DIY is not an option because the certification requires you to pass a specific exam. So, unless you are planning to start a second job as an AC technician, it is best to call in professionals.

  • The Time-Consuming Process

Installing and maintaining a system on your own is quite a task to achieve. So if you are new in this field and don’t have a lot of experience with AC units, you are going to have to start from scratch. It’ll become a time-consuming process for you. As such, it is better to hire a professional for installation.

When you opt for an experienced professional, you need not worry about needing AC repair in Bowling Green soon after you got the unit installed. They are trained enough to handle all your paperwork processes effectively and in much less time frame. If you are looking for AC installation or repair service, Carter HVAC is here to help. Call us today at (270) 282-1183 to know how our reliable AC installation and maintenance services in Bowling Green can help you.

Why Is Regular Air Conditioner Maintenance Necessary?

Your air conditioning system breaking down during a hot summer night is a nightmare that no one wants to go through. Regular maintenance of your air conditioning unit helps keep the air conditioning unit in check. The internal parts of the air conditioner require cleaning and maintenance to function to their fullest capacity. When you neglect your annual air conditioning maintenance checks, you ignore the decline in the performance of your air conditioner that can be easily prevented by a simple maintenance check.

Do you require Ac service in Bowling Green? Ponder over and pick the best option for yourself when concerning AC services.

Air Conditioning Parts: Service They Need

Various internal parts of the air conditioning unit require specific cleaning to function efficiently.

  • Air Conditioner Filters: Cleaning or replacing the filters in extreme conditions maintains the efficiency of the air conditioning unit. Dirty filters that may be clogged disrupt the airflow and cause the air conditioner’s efficiency to reduce significantly. The filter may also carry the dirt with the air into the evaporator coil due to an obstructed airflow. Replacing a dirty filter will also lower the energy consumption of your air conditioning unit relatively.
  • Air Conditioner Coils: Dust is collected on the air conditioner’s coils, both evaporator and condenser, if they aren’t cleaned regularly. The evaporator coil will, however, continue collecting dirt even after a clean filter has been placed. The dirt that gets collected reduces the airflow and also reduces the ability to absorb the heat. Cleaning the debris collected on the condenser coil allows good airflow. The air conditioning coils must be cleaned every year to avoid lessening their efficiency.
  • Coil Fins: The evaporator and condenser coils contain aluminum fins that are easily bent to block airflow through the coil. A fin comb combs the fins in their original condition.
  • Condensate Drains: Clogged drains prevent the unit from reducing any humidity, and this can cause the gathering of excessive moisture on the walls of the rooms. The drain channels can pass a stiff wire through the drain channels.

What Does An Air Conditioning Maintenance Service Require?

When you hire a professional technician to carry out a thorough maintenance check for your air conditioning system, the technician will find and solve any issues in your air conditioning system. However, a standard air conditioning maintenance service contains the following processes:

  • Checking the amount of refrigerant present.
  • Using a leak detector to find out if any refrigerant leaks exist.
  • Capturing any leaked refrigerant, as releasing it into the open air is illegal.
  • Checking for duct leaks in the central air conditioning system and sealing them.
  • Measuring the airflow in the evaporator coil.
  • Checking the electric control sequence.
  • Making sure that the cooling and the heating system are not operating simultaneously.
  • Cleanse and tighten all electrical connections.
  • Check belts for tightness and wear.
  • Oil all motors.
  • Check the functioning of the thermostat

Carter Heating and Cooling can handle all your Ac service in Bowling Green. Schedule an appointment today!

Frozen Pipe Prevention And Repair Services

A severe cold spell raises the chances of your pipes freezing or breaking. Melting water within the pipes condenses into ice, which may expand and clog the line. This obstruction will raise the pressure in the system and induce pipe collapses in susceptible regions, regardless of whether the pipe is of plastic, copper, or steel. You must contact a trusted Plumbing service in Bowling Green, as soon as you discover a change in water pressure.

Never use an open flame instrument or device, such as a blowtorch, propane, or kerosene heater, to unfreeze a frozen pipe. The combination of below-freezing temperatures and a lack of water circulation may cause any pipe to freeze and even break.

Frozen Pipes’ consequences

  • Frozen water pipes may create big breaches and disasters if they go undiscovered.
  • A single burst pipe may result in a building losing 4-8 gallons of water every minute; even a little leak might spill more than 250 gallons of water in a single day, costing thousands of dollars to fix.
  • Taking the necessary precautions is essential to protect your pipes in order to avoid such damage.
  • This may significantly raise your water bill, harm your plants, and make matters worse if the ice gets into the gap.

Take assistance from the best plumbing service in Bowling Green to help reduce the risk of frozen pipes, prevent disturbance and expensive repairs.

Ways To Prevent Frozen Pipes

  • Insulate your exterior pipes to prevent the water from solidifying due to the cold.
  • Allow small amounts of water to continuously flow through your faucets to keep the water moving.
  • Allow warm air to heat your pipes by opening cabinet doors under sinks.
  • Doors to the attic, basement, and other areas should be sealed.
  • Insulate cold-sensitive water storage units inside and outside your home.
  • Remove and store your outdoor hoses to keep them in good working order.

If you suspect that you have frozen pipes, go to the internet and look for a reliable

Some Tips to Thaw Frozen Pipes

While frozen pipes can cause various problems, pinpointing the exact location of the freeze can be difficult for an amateur. The majority of pipes behind building walls are difficult to reach. Outside pipelines, on the other hand, maybe easier to diagnose and treat. If you discover a frozen pipe, there are a few options for resuming water flow before going for professional help like Plumbing service in Bowling Green

  • To thaw a frozen pipe, apply heat.
  • This can be achieved by using a space heater, a hairdryer, or the application of warm towels or a heating pad.
  • While you’re warming the pipes, keep the faucet running. The ice will thaw and trickle out as a result.
  • Keep applying heat to the pipes until your water pressure returns.

The best course of action? Make an appointment with a licensed plumber you can rely on. We at Carter Heating and Cooling know the best cures and preventive steps to avoid the harm that frozen pipes may cause. We realize how critical it is to keep your plumbing running smoothly, particularly during the busy winter months.

Even if you close your business for the winter, frozen pipes may create severe problems in the spring, causing bursts, floods, and significant damage. To keep those pipes running even in harsh winters, visit http://www.carter-hvac.com/!