Many people know that purchasing an air conditioner is one of the most effective ways to beat the summer heat. It is only true if the system has been adequately maintained. We provide AC service in Bowling Green that ensures that the system is in good working order and does not malfunction.

Why Should You Wait Three Minutes Before Restarting Your Air Conditioner?

When an air conditioner is turned on, the compressor creates refrigerant pressure. When the compressor is turned off, whether manually, by power outages, or by fulfilling thermostat demand, it must remain off for at least 3 minutes to enable the pressure in the system to equalize before it can be safely resumed.

This temperature equalization is required since one side is hot (greater pressure) while the other is cool (lower pressure). While the compressor is functioning, the flow of gas (refrigerant) avoids a “jolt or shock,” but when power is lost, both sides heat and cool more, respectively, owing to the lack of refrigerant gas flow. As a result, a restart in less than 2 minutes might harm.

If, Even Then, The System is Not Starting, Check The Following:

1. Examine the thermostat. Is it out of date? Installing a newer, programmable thermostat could help you save money and energy. We also offer AC repair services at Bowling Green.

2. Examine any exposed ductwork for signs of wear, which could be a source of cooling loss or inefficiency in the home.

3. Examine the air vents in your home. Items such as drapes, furniture, and toys obstructing airflow should be removed.

4. Examine the drain line. A drain near the indoor cooling coil is typically located in the basement above the furnace.

You can keep your air unit drain clear throughout the summer by flushing one cup of chlorine bleach down it and rinsing it with a gallon of water. The air conditioner drain lines become clogged when dirt accumulates on the indoor coil.

When the drain line becomes clogged, the water must go somewhere, resulting in a backup of water in the drain pan, which may cause severe water damage to your home. A professional should clean drain lines at least once a year.

6. Inspect circuits to ensure that all electrical connections are turned on.

7. Check that the furnace or air conditioning unit’s power is turned on. After that, inspect the outdoor equipment for overgrowth and wear. Outdoor Recreational Equipment Your system will not function without it.

8. Examine the outdoor condenser. Check for any obstructions in or near the equipment, and clean the area around it. Leaves, vines, and debris can clog interior components and impair performance. The panels are intended to protect the electrical connections.

9. Examine the refrigerant lines visually. Insulation should be installed on the ropes. Proper insulation will increase the system’s efficiency. Insulation and refrigerant lines should be repaired.

10. Examine the outdoor electrical wiring for signs of wear. Contact a professional before using your system if you notice any damage or wear.

11. Recognize when your air conditioner has reached the end of its useful life. Air conditioners have a useful life. Even if you keep your unit well-maintained, it will eventually wear out.

If still the problem persists, please contact us!