What Causes A Furnace To Need To Be Reset?

It is a well-known fact that a properly functioning heating appliance is essential for keeping a home warm and pleasant throughout the winter. In addition, if the unit fails, the house might suddenly become cold and not comfortable. As a result, early detection of possible furnace faults is vital to avoid problems later on. While many issues might arise with your furnace, one of the most typical furnace problems is the reset button tripping.If you are facing this issue and reside in the area, contact us for heating service in Bowling Green to assist you.

What Do We Mean By A Furnace Reset Button?

You should be able to find the restart button with a quick look in the furnace's blower section. Furthermore, the reset button is usually yellow or red and is a safety feature. For example, if the furnace temperatures reach the acceptable upper-temperature limits, the entire system will shut down, and you need to reset it.It is necessary because it prevents the circuit breaker from being tripped. If the furnace keeps shutting down, look for a furnace replacement expert near me online, to help you fix the issue.

Reasons Why The Furnace Needs To Reset

Here are some reasons why you need to reset the furnace system, and why you need to contact our heating service experts in Bowling Green to fix some of the issues:

• Overheating

If your furnace is confined in an area with insufficient airflow, it may overheat repeatedly. As a result, the reset button is pressed frequently, and it is the most common reason for the reset button to trip.

• Insufficient Fuel

The unit's restart button may be activated when your furnace's fuel, whether oil or gas, runs out. A brief inspection of the gasoline tank will reveal whether a fuel shortage is to blame.

• Clogged Air Filter

The air filter in your heating and cooling unit is essential, and when heating your house, the heating device draws air via this filter.The filter may become blocked with time. A dirty and clogged air filter might also cause the furnace to reset, and the solution is as uncomplicated as changing or cleaning the air filter.

• Issues in The Gas Supply

If a gas valve attached to the furnace is shut down, either intentionally or accidentally, the supply line to the furnace is cut off. As a result, the furnace will not function because the valve is closed. When you have an issue like this, you should examine the gas valves and reset the system.

• Dirty Flame Sensor

Over time, dirt and debris can accumulate on the flame sensor of your furnace unit. It stops the sensor from working properly, leading the furnace to fail, and you need to reset it.

Steps To Reset The Furnace System

There is a simple way to reset your furnace system. To do so, turn off the pilot light, set the thermostat to the lowest heat, and disconnect the furnace's electricity and gas supplies. Then, hold a lit match to the pilot flame's aperture. Restore the furnace's power and gas supply once the pilot flame has been lit.However, if you think you cannot do this and are looking online for a ‘furnace replacement near me’, look no further than Carter Heating and Cooling. For more information, call us at (270) 282-1183 or email your queries, and our experts will reach out to you promptly